******************************************************************************* * 11.0.3 - Driver Update * * - November 3rd * * - PowerDB 11.0.3 (NO CHANGE) * * - MEGGER_APC.100.4 (DRIVER/FORM CHANGE) * * - AVO_MPRT.100.1 (DRIVER/FORM CHANGE) * ******************************************************************************* PdbSynch: Resolve a problem with date comparisons on Relay records. DRIVER/FORM CHANGES: RTMS (AVO_MPRT.dll and "Relay Test Management Software (RTMS)" Form): * FREQ: Increased the number of Over/Under Frequency elements to 3 each. * TOC: Added a zero sequence polarization method to the directional tests. * TRANSDUCER: Added mid-input range and a user-configurable number of test points. * MAIN SCREEN(TIMING, PREFAULT/FAULT, RAMP, SEQUENCER): Added the ability to work in primary values. * COF: Impedance testing support for more relays: ** Siemens *** 7SA522 v4.1 *** 7SA522 v4.3 *** 7SA522 v4.7 *** 7SA632 *** 7SD5 ** Toshiba GRZ100-101A ** ABB *** REL IEC670 v2.1.0 *** REL 511 *** REL 521 v2.3 *** REL 531 v2.3 *** REL 561 v2.3 ** Sifang CSC 101/161 ** NR PCS902 ** Areva P443 ** Alstom P438 ** Micom *** P433 *** P435 *** P437 *** P439 *** P430C MRCT (AVO_MPRT.dll and MRCT form): * Add function to upgrade features * Improve winding resistance test * Add leads detection feature * Move Home button * Show Relay button in PowerDB Lite if enabled * Change AC/DC test setting on System setting screen * Add CT assessment feature * Add nameplate estimate feature * Add Actual Burden on CT nameplate and display ratio/phase errors calculated based on it (or measured burden VA) * Modify CT name setting * Modify accuracy class lists * Add standard button on nameplate screen * Add In Service Tap on nameplate screen. * Add Simulate Primary Leads Swap on nameplate screen * modify VT Ratio test connection diagram * Add feature for user to change tap names in report * Move MRCT form from Virtual Front Panel to Instrument Transformers/Automated * Add display of RCF and phase error value near parallelogram * Change to maintain the sign of % ratio error in ratio result * Add primary noise filtration feature for ratio test SPI (MEGGER_APC.dll and “Smart Primary Injection Software (SPIS)” form): * Fixed “comma as decimal” issue * New PowerDB software will check firmware version and notify user if an update is needed. * This PowerDB version will require an update of the SPI225 firmware to version 1.0236. Updated translations. ******************************************************************************* * 11.0.3 - Driver Update * * - September 2nd * * - PowerDB 11.0.3 (NO CHANGE) * * - MEGGER_OTSAFPB.100.3 (DRIVER/FORM CHANGE) * ******************************************************************************* DRIVER CHANGES: MEGGER_OTS: Implemented support for the new OTS refresh. FORM CHANGES: 57390 - OTS OIL TEST ******************************************************************************* * 11.0.3 - Driver Update * * - June 24th * * - PowerDB 11.0.3 (NO CHANGE) * * - AVO_BITE 11.0.3.1 (DRIVER/FORM CHANGE) * * - AVO_BITE3 11.0.3.1 (DRIVER/FORM CHANGE) * ******************************************************************************* DRIVER CHANGES: AVO_BITE: Added support for a total string voltage divisor in the BITE table summary. AVO_BITE: Limited the maximum number of Cells/Straps on the form to 500. AVO_BITE: Fixed several minor issues with the "Use Database Baseline Impedance" feature. AVO_BITE: Made the resistance units selection more consistent (applied the value to all tables). AVO_BITE: Fixed an issue with the charger information tables. FORM CHANGES: 10750 ******************************************************************************* * 11.0.3 - Driver Update * * - June 9th * * - PowerDB 11.0.3 (NO CHANGE) * * - AVO_DELTA2000.v11.0.3.9 (DRIVER/FORM CHANGE) * ******************************************************************************* DRIVER CHANGES: AVO_DELTA: Implemented support for the DTA6 export in PowerDB Lite. AVO_DELTA: Generators and Rotating Machinery forms now use no suppression. AVO_DELTA: Made multiple minor fixes and improvements to the labels and correction factors in the transformer bushing tables. AVO_DELTA: Implemented row highlighting for the active row on Delta forms. AVO_DELTA: Fixed an issue where the correction factor was automatically populating in manual tests. AVO_DELTA: Renamed Hot Collar designation to Skirt #. FORM CHANGES: 27600 27610 27650 91510 91515 92500 92510 92520 92529 92530 92550 93500 94500 95500 95501 96005 98000 98005 98006 ******************************************************************************* * 11.0.3 - RELEASE * * - March 23rd * * - PowerDB 11.0.3 (APP CHANGE) * * - AVO_DLRO.v11.0.2.3 (DRIVER/FORM CHANGE) * * - AVO_MPRT.v11.0.3.3 (DRIVER/FORM CHANGE) * * - AVO_S1.v11.0.3.0 (DRIVER/FORM CHANGE) * * - AVO_TTR.v11.0.3.1 (DRIVER/FORM CHANGE) * * - MEGGER_APC.v11.0.3.2 (DRIVER/FORM CHANGE) * * - MEGGER_ODEN.v11.0.3.0 (DRIVER/FORM CHANGE) * * - MEGGER_SVERKER.v11.0.3.0 (DRIVER/FORM CHANGE) * * - PDB_NOINST.v11.0.3.0 (DRIVER/FORM CHANGE) * ******************************************************************************* MAIN APPLICATION: POWERDB: Fixed instrument selection translatable items in Lite. POWERDB: Fixed an issue with the BITE2/3 import test date. POWERDB: Adding the option to change header in Lite. POWERDB: Adds button to the Lite ribbon for exporting DTA6 files. Hide option if not enabled by form. POWERDB: Fixed rare crash when exiting edit controls on the form. POWERDB: Set any field on a form that uses "AddReqColorBox" RunTagCmd to have a green box if it has a value and is not read only. Previously only fields that were required, not read only, and had a value would be given a green box. POWERDB: Fixed crash with assign compliance. POWERDB: Fixed minor issue with Add to Job wizard and labelling on database admin dialog. POWERDB: Serial Communications - Fixed Parity and ByteSize not being set as specified in instrument configuration dialogs. POWERDB: Fixed issue with previous test dates not showing up on the compliance view. POWERDB: Fixed Org4 not showing up in compliance view. POWERDB: New Asset Dialog - Fixed Pop-Up message that appears when an asset cannot be added so the wording is easier to understand. POWERDB: Fixed a crash that would occur if attempting to close the trend data selection when it doesn't exist. POWERDB: Fixes the Asset Assign Compliance and Properties dialogs to match the update that allowed dynamic Org levels. POWERDB: Fixes Save As button in Lite "File" view. POWERDB: Fixed constant "wait" cursor that occurs when doing data entry. POWERDB: Add to Job dialog now takes the Highest Org Level option into account. POWERDB: Implemented a fix for the FormUseMultilineEditDlg feature. The dialog should now display all rows of values instead of starting at the selected row. POWERDB: Added new format to CSV export. POWERDB: Fixed crash with exporting to CSV. POWERDB: Added an option on the Result ribbon for restoring results. Only PowerUsers and Above should be able to use this function. The function also checks if the corresponding assets are deleted. If so, the user is asked whether they want to restore them as well and thus restore the results or not restore the assets and leave the results deleted as well. Only results with active assets or approved assets to be restored will be restored. POWERDB: Fixes the crash related to the db startup message. POWERDB: Fixes the compliance view to say "No Test Status" instead of "Not Tested" when the result does not have a test status. POWERDB: Print external doc after the related result. POWERDB: Fixes issue where the administration dialog does not properly load the values from the database into the dialog. ("Automatically log off after", "Automatically save test after", etc.) POWERDB: Fixes issue where some form dialogs would not scale right with certain styles enabled. POWERDB: Fixed incorrect scaling of text when zooming in and out. POWERDB: Fixes issue with the equipment list dialog populating the type too many times. POWERDB: Fixed pasted field only blue for first two pages. PDBSYNCH: Fixes issue when updating localdb to version 11 after a backup of the database. Curve Library: Imported S&C curves. DRIVER CHANGES: AVO_S1: Fixed communication loss with MIT/S1 525/568 instruments during live streams. MEGGER_SVERKER: Recompiled with Serial changes to fix Parity. MEGGER_ODEN: Recompiled with Serial changes to fix Parity. CommonInstLib: Modified the ForceTCPIP logic to allow forcing TCPIP for some models of an instrument and not for others. AVO_DLRO: Fixed localization issue in languages that use the comma as a decimal separator, and improved the way we handle unexpected responses during remote control for the DLRO 100. AVO_DLRO: Set minimum values for ramp time, plateau duration, and test current, and changed the visual style of the property sheet. AVO_TTR: Added support for the TTR 310 Ethernet communication. AVO_MPRT(MPRT): Fix errors for MPRT caused by unsupported commands and sending voltage commands when all voltages are converted to currents. AVO_MPRT(MPRT): Fix sequence test for MPRT. (Don't send "digcap" commands.) AVO_MPRT(MPRT): Don't send extra WAI0 command to MPRTs during prefault-fault test. This fixes getting either a "NOP" or the timeout value back as a result. PDB_NOINST: Rebuilt for 11.0.3 to solve onboard instrument detect problems. DRIVER/FORM CHANGES: RTMS ("Relay Test Management Software (RTMS)" Form): 1. Change scripting to work with new Lite Header options. MRCT (AVO_MPRT.dll and MRCT form): 1. Add Dc saturation test feature 2. Add feature to combine reports for multiple CTs/VTs 3. Add parallelogram limits for accuracy classes 0.15 and 0.15S 4. Add VT lead swap warning on connection diagram 5. Modify VT terminologies and settings 6. Make manual test graph trace wider 7. Copy number of taps at nameplate copy when the current CT has not been tested 8. Return to Run All Tests screen when tests finish if tests are started from this screen (after report closed) 9. Save ShowSaturationData setting in file and do not clear them when printing in PowerDB Pro 10. Change error text display for winding measurement error 11. Changed Embedded header to standard header as Lite and Pro. 12. Turned off deviation alarm for winding and burden tests. 13. Added new Lite Header options. SPI (MEGGER_APC.dll and "SPI FRONT PANEL" form): 1. Fix CAN NOT FIND TAP message in Parallel Mode. 2. Fixed Simple screen current update after running Advance Pickup Test. - Fixed Simple Screen Momentary Pickup. - Fixed Advanced Pickup Screen current update. 3. Added Error Codes for SPI 6000. - Updated error code logic to support slaves errors and warnings. 4. Errors and Warnings slave support update. 5. Added ADV_SOFT_KEY_CMD and QRY_SOFT_OPT_CMD. 6. Added SpiTesterRunningBinInpTest to support Binary test in SPI Tester. 7. Fixed NT reading in Functional Tester. 8. Fixed vbscript error on SPI Tester. 9. Added ERC command to PRETEST_CMD. 10. Added support for Continuous pickup test. 11. Added support to log IIR registers. 12. Adjusted controls on SpiReport* subforms to display and print correctly with a vertical text orientation. 13. Added DC_OFFEST_CMD and DBG_CMD, fixed Open Breaker between pulses issue, fixed connected icon indicator. 14. Fixed time reported on Open breaker between pulses. 15. Added new Lite Header options. FORM CHANGES: 27660 - MULTI-WINDING CT TEST: Updated to work in PowerDB Lite with MCT 27650 - CURRENT TRANSFORMER TEST: Updated to work in PowerDB Lite with MCT 16101 - VACUUM CIRCUIT BREAKER 92600 - OCR: Added special case to display full curve names for a few particular curves with names that don't fit in the space provided in the Curve Library. Job MultiUse Report ******************************************************************************* * 11.0.2 - Driver Update * * - January 26th * * - PowerDB 11.0.2 (NO CHANGE) * * - AVO_DLRO.v11.0.2.1 (DRIVER/FORM CHANGE) * * - PROGRAMMA_TORKEL.v11.0.2.1 (DRIVER/FORM CHANGE) * ******************************************************************************* DRIVER CHANGES: AVO_DLRO: Fixed an issue on the DLRO 100 where the control panel cuts off asset tags at the first space in downloaded results. PROGRAMMA_TORKEL: Fixed communication issue with the torkel in version 11. ******************************************************************************* * 11.0.2 - RELEASE * * - January 19th * * - PowerDB 11.0.2 * ******************************************************************************* MAIN APPLICATION: POWERDB: Fixes error with DTA import. POWERDB: Fix Lite SMRT/FREJA Desktop shortcut startup. ******************************************************************************* * 11.0.1 - Driver Update * * - December 8th * * - PowerDB 11.0.1 (NO CHANGE) * * - AVO_S1.v11.0.1.1 (DRIVER/FORM CHANGE) * ******************************************************************************* DRIVER CHANGES: AVO_S1: Fixed crash that occurs if the data stream is interrupted during a S1 525 download. ******************************************************************************* * 11.0.1 - RELEASE * * - December 8th * * - PowerDB 11.0.1 (APP CHANGE) * * - AVO_MPRT.v11.0.1.0 (DRIVER/FORM CHANGE) * * - PDB_NOINST.v11.0.1.0 (DRIVER/FORM CHANGE) * ******************************************************************************* MAIN APPLICATION: Correct version numbering. The DLRO 100 button in PowerDB Lite now goes directly to the DLRO 100 form. Fixed an issue with how tests are sorted in the open PdbXml file dialog in PowerDB Lite. Fixed a crash that occurred when saving to PDF in PowerDB Onboard mode. DRIVER CHANGES: PDB_NOINST: Correct resource includes that were removed by Visual Studio so that dialogs can be loaded again. AVO_MPRT: FREQ Over/Under Timing: Fix test set error when Nominal is within min/max tolerance band and a negative ramp time is calculated. ******************************************************************************* * 11.0.0 - Driver Update * * - December 1st * * - PowerDB 11.0.0 (NO CHANGE) * * - PROGRAMMA_TORKEL.v11.0.0.1 (DRIVER/FORM CHANGE) * * - AVO_MPRT.v11.0.0.1 (DRIVER/FORM CHANGE) * * - AVO_DLRO.v11.0.0.1 (DRIVER/FORM CHANGE) * ******************************************************************************* Remove RC designation from PROGRAMMA_TORKEL, AVO_MPRT, AVO_DLRO for driver update release. DLRO: Added support for the DLRO 100. Torkel/Anton DMA: Added a button on the hydrometer data table to import results from the hydrometer. MRCT: Added software version check to decide if ratio error calculation is available when opening a file. AVO_MPRT: Ramping - Fixed comma-as-decimal float formatting for smooth ramping command. AVO_MPRT: Timing - Fixed comma-as-decimal float formatting for timing tests. AVO_MPRT: Timing - If abort is pressed during 2x injection, don't show NoOPeration during 2x status. AVO_MPRT: Synchronizer - Fixed comma-as-decimal float formatting for process commands. AVO_MPRT: Synchronizer - Fixed PDB crash on when selecting row in test table. FORM CHANGES: 10756 - AUTOMATED BATTERY DISCHARGE SUBFORM CHANGES: MctReport MprtSyncTable ************************************************************************ * 11.0 RELEASE * * - November 5th * * - PowerDB 11.0 * ************************************************************************ DRIVER CHANGES: PowerDB: Changed the way PowerDB detects com ports. This fixes an edge case where PowerDB could occasionally time out during detection, and fail to find all of the comports available. PowerDB: Fixed the time format on SQL timestamps generated in scripting. This was causing localization issues in Mexico on the battery forms. PowerDB: Fixed a status message that appeared to be in a foreign language when PowerDB Onboard is loading. PowerDB: Fixed an issue in PowerDB onboard that caused the instrument name and serial number not to display correctly in the instrument detect dialog. MTO: Improved the performance of the MTO form. MTO: Reorganized MTO Test Wizard and fixed a rare crash that could occur if users hit F2 while starting a test. MTO: Disabled MTO Test Wizard tap dropdowns when they are empty. MTO: Disabled the MTO manual tests when using MTO 210. MTO: Fixed an issue that was causing the standard to not update on the form when changed in the settings. MTO: Fixed an issue with the style of the test wizard buttons in onboard mode. MTO: Enabled the show differences checkbox in onboard. DELTA: Added ability to calculate ITC for overall and bushing sections of the delta forms. DELTA: Added automatic reading of temperature/humidity from instrument when performing an ITC test. DELTA: Added support for updating ITC when oil/ambient temperature is changed on the form. DELTA: Corrected the labels on the overall test section of form 95501. DELTA: Renamed the suppression settings in the quick tests section to be more descriptive. DELTA: Fixed an issue where suppression was being forced to Frequency Variation in manual tests. TTR: Fixed an issue where PowerDB Onboard would freeze following a prompt to save on form 56006. TTR: Fixed an issue that was causing phase C on the TTR forms to always display phase in minutes. TTR: Fixed an issue where PowerDB would not close properly after running TTR test. TTR: Fixed an issue where PowerDB would freeze if the user stopped an in progress TTR test. TTR: Fixed an issue with the TTR firmware/serial number not being displayed in the form. TTR: Fixed an issue where initialization of the TTR 330 sometimes failed in remote testing. BITE: Reorganized the form to allow translations to fit better. BITE: Reorganized the charger section of the form. MEGGER_DET24C: Adding support for the new bluetooth version of the DET24C. AVO_S1: Fixed an issue with simulation data for S1-5010 loaded data. AVO_S1: Fixed an issue with data download for the S1-5010 in version 11 due to unicode changes. TORKEL: Added an autosave prompt in lite and fixed test data not clearing when opening a new form. TORKEL: Fixed a number of minor and cosmetic issues with the Torkel/BVM form. TORKEL: Fixed an issue where the autosave prompt would display twice if you start Torkel/BVM at the same time. TORKEL: Added several new log messages for the Torkel data capture parameters. TORKEL: Modified the F1 switch message to appear before we initialize the test set rather than after. BVM: Removed several unnecessary log messages for the BVM. BVM: The BVM should now pause if the Torkel pauses. BVM: Added a BVM connection diagram to the Torkel/BVM form. ANTON_DMA: Added a new hydrometer import. ANTON_DMA: Fixed an issue with the number of significant digits on the specific gravity value. RTMS: Added new Timing module. RTMS: Added Smooth Ramping option to ramping module. RTMS: Added/Updated Help files. RTMS: Added support for new SMRT and Freja models. RTMS: Added Impedance modules for: - ABB REF630; - PROTECTA DRFP, DRFP %; - ALSTOM P438, P44T; - AREVA P441, P442, P444 (replaces P44X option for clarity); - GE GCX, GCY. RTMS: Added RTMS Pro modules: - AVTS integration - Frequency - Synchronizer MRCT: Added VT ratio and winding tests MRCT: Added functionality for users to add/delete secondary current ratings MRCT: Added Chinese and Korean language support MRCT: Fixed a bug on zoom scale when switching from report to test screens FORM CHANGES (SINCE 10.5): MRCT Relay Test Management Software (RTMS) 10750 - BATTERY IMP/COND TEST 56353 - MTO - 3� WINDING RESISTANCE 92500 - PF AIR-MAG CIRCUIT BREAKER 56356 - MTO - TX HEAT RUN 92520 - PF SF6 DEAD TANK CIRCUIT BREAKER 92510 - PF OIL CIRCUIT BREAKER 92530 - PF VACUUM CIRCUIT BREAKER 92550 - PF VACUUM CIRCUIT RECLOSER SPI FRONT PANEL 10756 - AUTOMATED BATTERY DISCHARGE 94500 - PF THREE-WINDING TRANSFORMERS 95501 - PF AUTO TRANSFORMER WITHOUT TERTIARY 95500 - PF AUTO TRANSFORMER WITH TERTIARY 93500 - PF TWO-WINDING TRANSFORMERS 98005 - PF ROTATING MACHINERY TIP UP 56352 - MTO210 WINDING RESISTANCE 56050 - TRANS. DISSIPATION FACTOR 32500 - SYNCH MOTOR DISSIPATION FACTOR 32100 - MOTOR DISSIPATION FACTOR TEST 16300 - OIL CIRCUIT BREAKER DISSIPATION 92529 - PF SF6 LIVE TANK CIRCUIT BREAKER 91510 - PF MISCELLANEOUS EQUIPMENT 00001 - COVER PAGE 00002 - COVER LETTER 00100 - Test Procedures 00110 - PLACEHOLDER 82000 - PHAZER REPORT AvtsImport CabaWinImport CabaWinImport_FormExport ChangePrintReportOrder Compliance Report Form Update Report Form Version Report Full Form Search Maintenance Report Manufacturer Report OCR - Maintenance Report ProtestImport RtsImport SubForm Revision Report Tests Run Report Current & Voltage Sensing Device 27610 - PF CURRENT TRANSFORMER 32400 - SYNCH MOTOR PI TEST 10754 - BASIC BATTERY DISCHARGE 93500 - PF TWO-WINDING TRANSFORMERS (2) 27600 - PF PT/VT TRANSFORMER 56004 - TTR TESTING via NAMEPLATE INPUT 90000 - TRANSFORMER 60080 - CUSTOM SV TEST 60000 - PI TEST 60070 - SV TEST 60010 - IR TEST 45444 - INFRARED INSPECTION FLIR P640 56301 - MTO - RESISTANCE QUICK TESTS [& GENERATORS] 56365 - TTR - 3� TX WITH TAP CHANGER 54100 - AUTOMATIC TRANSFER SWITCH TEST 54000 - AUTOMATIC TRANSFER SWITCH TEST 50300 - POWER PANEL INSULATION TEST 50100 - LV SWITCHBOARD INSULATION 50001 - MV SWITCHBOARD INSULATION 31301 - MEDIUM VOLTGE VACUUM MOTOR START 31300 - MEDIUM VOLTGE VACUUM MOTOR START 31001 - MOTOR STARTER TEST 32000 - MOTOR PI TEST 32450 - SYNCH MOTOR PI TEST ARMATURE 97560 - ROTATING MACHINERY PI TEST 98500 - ROTATING MACHINERY STEP VOLTAGE 30100 - MOTOR CONTROL CENTER INSULATION 56006 - TTR - TX WITH PHASE SHIFTING 92000 - CIRCUIT BREAKERS 91000 - INSULATION - MISC. EQUIPMENT 65500 - LIGHTNING ARRESTER TEST 27450 - CONTROL POWER TRANSFORMER TEST 27400 - CONTROL POWER TRANSFORMER TEST 27200 - VOLTAGE TRANSFORMER TEST 27000 - CT PRIMARY INJECTION RATIO 29101 - DISCONNECT SELECTOR SWITCH 29001 - LOADBREAK DISCONNECT 15602 - FUSE DISCONNECT INSP. TEST 15501 - BOLTED PRESSURE SWITCH TEST 16201 - OIL CIRCUIT BREAKER TEST 16101 - VACUUM CIRCUIT BREAKER 16001 - MEDIUM VOLTAGE AIR CKT. BKR 14000 - BUS DUCT INSULATION TEST 27800 - MTO - CT WDG RESISTANCE 27850 - MTO - PT/VT WDG RESISTANCE 98006 - PF STATOR COIL TIP UP 93510 - TTR - MAGNETIC BALANCE 91515 - PF BUSHING 56001 - TTR QUICK TEST 15055 - LOW VOLT. PWR. CKT. BKR. TEST 96005 - PF CABLES 56003 - TTR SINGLE PHASE QUICK TESTS - MULTIPLE RESULTS 27700 - TTR - CT RATIO & PHASE DEV 56600 - TRANSFORMER PI TEST 56002 - TTR - TURNS RATIO QUICK TESTS 93002 - MULTIPLE POWER FACTOR QUICK TESTS 94000 - TRANSFORMER TIP-UP TEST 27750 - TTR - PT/VT RATIO & PHASE DEV 98000 - PF GENERATOR TIP UP 57952 - WEIDMANN-ACTI DGA MRCT BurnIn Test 13000 - CABLE PI TEST 49900 - GENERIC MULTIFUNCTION RELAY 66500 - INSPECTION SHEET 56502 - TRANSFORMER TTR (VANGUARD) 15300 - BREAKER ANALYZER VANGUARD VCBA-2 57100 - TRANS. LIQUID COOLANT ANALYSIS 92600 - OCR